HAZET Torque wrench 5109KV

• Can be calibrated
• Long service life / high accuracy
• Option of:
  • Removal
  • Repair (if necessary)
  • Installation
  • Adjustment
  • Calibration
• Note: adjustment, possible repairs with removal/assembly of the KV torque wrench only in the HAZET Service Center
• Suitable for control of inspection and test equipment
• Sustainable and environmentally sound
• Safety:
  • Haptic (close-gap release)
  • Audible (“click” sound)
• Right/left release by plug-in square,
  thereby tightening at torque setting, both to the right and to the left within the specified tolerance
• Low weight for good handling and fatigue-free work

Product design features

• Slim design in strict accordance with the required insulating properties (material strength/overlaps)
• Smooth transitions on switching and moving parts with ergonomic handle design and calibration notch
• Uniform look even when using other components (e.g. red insulated sockets)
• Attractive colour design of the housing and head with signal colours red/yellow
• Handle colour in black to make a distinction with the colour and to prevent it appearing dirty quickly
• No disturbing projecting parts (e.g. shift lever)

• DIN EN ISO 6789-2:2017, DIN 3120, ISO 1174-1, IEC 60900:2018
• Made in Germany
• Output: Square, solid 10 mm (3/8 inch)
• Dimensions / length: 305 mm
• VDE protective insulation up to 1000 V
• Nm min-max: 5 – 25 Nm
• Tolerance: 4 %
• Scale Graduation (Nm): 0.5 Nm
• Actuating force min.-max. kg: 2.1 – 11.0 kg
• Number of teeth: 24 (Opening angle 15°)
• No more turning back: Continuous long-term tests on the 5000 series and 6000 series of HAZET torque wrenches have demonstrated that turning them back to the smallest scale value is not required