HAZET 7290-2STACCAL Torque wrench with built-in angle gauge 7000 sTAC

Application:
For high-precision screw connections with torque/rotation angle calling for high accuracy or mandatory documentation, e.g. engine components especially cylinder head bolts, machine construction with increased requirements (including robot technology etc.)

• Smart technology – Ready for Industry 4.0
• Torque wrench including DAkkS calibration certificate
• Includes insert reversible ratchet 6402-1 Outside square 10 = ³⁄₈″
• Length with / without insert tool: 347 mm / 302 mm
• HAZET Smart Technology consisting of the optional smartTAC app and Bluetooth 4.1 Low Energy interface (may be subject to national approval restrictions) with flawless live data exchange to display the screwing process on mobile end devices such as smartphones (smart watches) and tablet PCs as well as via a USB-C interface for programming the torque wrench with built-in angle gauge and documenting screwing data via laptops and PCs
  All sTAC torque wrenches can also be used autonomously, without the SmartTAC app
• Unique ergonomic, user-oriented HAZET design of entire tool for professional use
• The reduction in size and integration of the PCB into the main pipe, results in dimensions that allow for the small torque wrench with built-in angle gauge from 1 Nm
• Protection class IP 40
  Spray-water-proof display and membrane keyboard
• Tested in accordance with DIN EN ISO 6789-2:2017
• USB-C interface for programming torque wrenches with built-in angle gauge and for documentation of the screwing data via laptop and PC
• Including standard replaceable Li ion rechargeable battery, type 14650 / 3,7 Volt, can be charged directly on the tool via USB-C connector
• Including 1 metre USB 3.1 / A-C cable

Functions: 7000 sTAC

• Large, high-contrast illuminated, easily readable OLED display, dimmable and 180° rotatable
• Indication of the measuring values in 13 mm font size, including a rating of the screw-joint (OK / not OK)
• Display deviation in right and left torque: from ±1% / ±1 digit
• Display deviation in right and left rotation angle: ±1% / ±1°
• Rotation angle range adding: 0 to 999°
• Torque tolerance for OK display (green): adjustable ±1 to 10%
• Rotation angle tolerance for OK display (green): adjustable 1 to 90°
• Choice of torque measuring units: Nm, lbf ft, lbf in or kgf m
• Lets you select or program the effective length for other insert tools from 0 to 250 m
  (requirement for correct torque / rotation angle measurements)
• Four signals alert the user during screwing process: audible signal (buzzer), vibration signal, synchronous numerical display, and a 360° LED display with “traffic light function” that is visible from all around
• Threshold value, pre-warning level: adjustable 50 to 99%
• Adjustable signaling, On/Off audible signal (buzzer) and vibration
• Reset function, restore to factory setting
• Stand-by time: adjustable 1 to 10 min.
• Indication of battery condition and memory
• Memory capacity, including date and time: up to 3000 measurements
• Offers possibility to program flow charts and sets of parameters: 25 and 25
• 2 control functions: programmable torque control for angle tightening and angle control for torque tightening
• Menu locking against unintentional change, four-digit code is personally selected
• Display of the software version with serial numbers, calibration date and service display / usage counter
• Menu languages: German, English, French, Italian, Chinese
• Optional on request: Programming and evaluation software for laptop and PC
• SmartTAC app for Android end devices for series 7000-2 sTAC
• In preparation: SmartTAC app for Apple IOS end devices
• The HAZET SmartTAC torque wrenches with built-in angle gauge of the 7000-2 sTAC series with Bluetooth interface have valid radio licences in all EU countries as well as in Switzerland, Norway, China, India, South Korea and Turkey and may be sold there. Radio licences for Mexico, South Africa, USA and Canada are currently in preparation.
  Other countries on request.
• For countries without radio licences, we offer the 7000-5 sTAC series SmartTAC torque wrench without a Bluetooth interface. These can be connected to a laptop and PC via a USB port and to the optional programming and evaluation software. It is not possible to use the SmartTAC app for mobile devices due to the lack of a Bluetooth interface.
• Release accuracy tolerance according to ISO 6789-2:2017
• Made in Germany
• Output: Insert square 9 x 12 mm, Square, solid 10 mm (3/8 inch)
• Dimensions: 302 mm
• Net weight: 0.64 kg
• Nm min-max: 5 – 60 Nm
• lbf min-max: 3.5 – 44 lbf.ft
• Tolerance: 1 %
• Effective torque wrench length min.-max. I1 mm: 248.00 –  Nm
• Actuating force min.-max. kg: 1.8 – 22.2 kg
• Number of teeth: 30 (Opening angle 12°)